Icom IC-2100H

17
3
SETTING A FREQUENCY
■ Using the keypad
The frequency can be directly set via numeral
keys on the microphone.
Ä Push [VFO] to select VFO mode, if necessary.
Å Push [ENT] to activate the keypad for digit input.
ENT
C
Ç Push 6 keys to input a frequency.
• When a digit is mistakenly input, push [ENT] to clear the input,
then repeat input from the 1st digit.
• Pushing [CLR] clears input digits and retrieves the frequency.
É Push [Y] or [Z] to make adjustments below the 10 kHz digit, if de-
sired.
[EXAMPLE]: Setting the frequency to 145.3625 MHz.
VFO
C
ENT
3
PRIO
5
MID
1
MONI
4
HIGH
6
LOW
9
5
1
9
5
1
9
5
1
9
5
1
2
SCAN