Icom IC-2720H - Other Functions; I Set Mode

56
11
OTHER FUNCTIONS
10
11
MAIN
T X
M
MAIN
T X
M
MAIN
T X
T
M
MAIN
T X
M
MAIN
T X
M
MAIN
T X
M
MAIN
T X
T SQL
M
MAIN
T X
M
MAIN
T X
M
MAIN
T X
M
MAIN
T X
DUP
M
MAIN
T X
DTCS
M
MAIN
T X
DTCS
M
MAIN
T X
M
• Mode selection**
• Display dimmer • Display color • Repeater tone frequency
• Narrow setting
‡
• Channel skip setting
†
• 1st Lo frequency
• Tone squelch frequency
• Weather alert*
• Scan resume timer • Tuning step • Offset frequency • DTCS polarity
• DTCS code
*Available for USA version only.
†
Appears when accessing set mode from memory mode only.
‡
Available for the USA version and appears when accessing set mode from left band only.
**Does not appear when accessing set mode from 900 MHz band.
: Push (front panel); or (microphone)
SET
: Push (front panel); or (microphone)
LOW
PRIO
■ Set mode
• Set mode operation
q Push the desired band’s [MAIN•BAND] to select the main
band.
w Push
[SET• ] to enter the set mode.
e Push
[SET• ] or [LOW•PRIO] to select the desired item.
r Rotate the main band’s [DIAL] to select the condition or
value.
t Push
[TONE•DTMF] to exit set mode.
• Set mode items
z Push [BAND] to select the main band.
x Push [
SET B(D-OFF)] to enter set mode.
c Push [
SET B(D-OFF)] or [ ENT C(T-OFF)] to select
the desired item.
v Push [Y] or [Z] to select the condition or value.
b Push [
CLR A(MW)] to exit set mode.
SET
B
IC-2720H_2.qxd 03.5.13 9:45 Page 56 (1,1)