Icom IC-705 - Page 15

14
REMOTE CONTROL
Cmd� Sub cmd� Data Description
1A* 05 VOX
0359 00 ~ 20 Send/read the VOX DELAY setting
( 00=0�0s ~ 20=2�0s in 0�1s steps)
0360 00 ~ 03
Send/read the VOICE DELAY setting
( 00=OFF, 01=SHORT,
02=MID, 03=LONG)
CD
0361 00/01 Send/read the Call Sign Display/
Name Display setting
( 00=Call Sign Display,
01=Name Display)
GPS Position
0362 00 ~ 02 Send/read the Compass Direction
setting
( 00=Heading Up, 01=North Up,
02=South Up)
06 See p� 21� Send/read the DATA mode setting
07 00/01 Send/read the NTP server access
(00=Terminate, 01=Initiate)
08*
1
00 ~ 02 Read NTP server access result
(00= Accessing, or have not
accessed after Power ON,
01=Succeeded, 02=Failed)
09*
1
00/01 Read the OVF indicator status
(00=OFF, 01=ON)
0A 00 ~ 02 Send/read the Share Pictures
function status
( 00=OFF, 01=ON, 02=ON (Repeat))
L While transmitting the picture
using the DV Fast Data function,
sends ON even if the status is set
to OFF�
0B*
1
00/01 Read the type of power supply
based on the current voltage
( 00=External power supply,
01=Battery pack)
1B* 00 See p� 21�
Send/read the Repeater tone frequency
01 See p� 21� Send/read the TSQL tone frequency
02 See p� 21�
Send/read the DTCS code and polarity
07 See p� 22� Send/read the CSQL code (DV mode)
1C 00* 00/01 Send/read the transceiver’s status
(00=RX, 01=TX)
01* 00 ~ 02
Send/read the Antenna tuner's status
(00=OFF, 01=ON, 02=Tune)
02* 00/01 Send/read the Transmit frequency
monitor (XFC)
(00=OFF, 01=ON)
03*
1
See p� 16� Read the transmit frequency
1E 00*
1
Read number of available TX
frequency band
01*
1
See p� 16� Read TX band edge frequencies
02*
1
Read number of user-set TX
frequency band
03* See p� 16� Send/read the user-set TX band
edge frequencies
Cmd� Sub cmd� Data Description
1F* 00 See p� 22� SET > My Station >
Send/read the My Call Sign setting
01 See p� 22� CS >
Send/read the UR, R1, R2 setting
02 See p� 22� SET > My Station >
Send/read the TX Message setting
20 00 00* 00/01*
7
Send/read the Auto DV RX Call
signs output
(00=OFF, 01=ON)
01 See p� 22� Output DV RX Call signs for
transceive
02*
1
See p� 22� Read Auto DV RX Call signs
01 00* 00/01*
7
Send/read the Auto DV RX message
output
(00=OFF, 01=ON)
01 See p� 23� Output DV RX message for
transceive
02*
1
See p� 23� Read Auto DV RX message
20 02 00* 00/01*
7
Send/read the Auto DV RX status
output
(00=OFF, 01=ON)
01 See p� 23� Output DV RX status for transceive
02*
1
See p� 23� Read Auto DV RX status
03 00* 00/01 Send/read the Auto DV RX
GPS/D-PRS data output
(00=OFF, 01=ON)
0100 See p� 23� Output DV RX GPS/D-PRS Position
for transceive
0101 See p� 24� Output DV RX D-PRS Object status
for transceive
0102 See p� 24� Output DV RX D-PRS Item status
for transceive
0103 See p� 25� Output DV RX D-PRS Weather
status for transceive
0200*
1
See p� 23� Read Auto DV RX GPS/D-PRS
Position status
0201*
1
See p� 24� Read Auto DV RX D-PRS Object
status
0202*
1
See p� 24� Read Auto DV RX D-PRS Item
status
0203*
1
See p� 25� Read Auto DV RX D-PRS Weather
status
04 00* 00/01 Send/read Auto DV RX GPS/D-PRS
message output
(00=OFF, 01=ON)
01 See p� 25� Output DV RX D-PRS message for
transceive
02*
1
See p� 25� Read Auto DV RX D-PRS message
status
21* 00 See p� 25� Send/read the RIT frequency
01 00/01 Send/read the RIT setting
(00=OFF, 01=ON)
02 00/01
Send/read the ∂TX setting
(00=OFF, 01=ON)
Remote control (CI-V) information
D Command table