Icom IC-756PRO2 - I Memory Channel Screen

52
6
MEMORY OPERATION
■ Memory channel screen
The memory channel screen simultaneously shows 7
memory channels and their programmed contents. 13
memory channels can be displayed in the wide mem-
ory channel screen.
You can select a desired memory channel from the
memory channel screen.
•Selecting a memory channel using the
memory channel screen
q Push [EXIT/SET] several times to close a multi-
function screen, if necessary.
w Push [(F-4)MEMORY] to select the memory chan-
nel screen.
•[(F-5)WIDE] switches the standard and wide screens.
e Rotate the tuning dial while pushing [(F-2)SET] to
select the desired memory channel.
•[Y] and [Z] can also be used.
r Push [EXIT/SET] to exit the memory channel
screen.
•Confirming programmed memory
channels
q Select the memory channel screen as described
above.
w Rotate the tuning dial while pushing [(F-1)ROLL]
to scroll the screen.
e Push [(F-2)SET] to select the highlighted memory
channel, if desired.
r Push [EXIT/SET] to exit the memory channel
screen.
•Setting a memory channel as a select
memory
Select memory channels are used for select memory
scan. Select memory scan repeatedly scans the se-
lect memory channels only. This is useful to speed up
the memory scan interval. Of course, select memory
channels are also scanned during normal memory
scan.
q Select the memory channel screen as described at
left.
w Rotate the tuning dial while pushing [(F-1)ROLL]
or [(F-2)SET] to select the desired memory chan-
nel.
•[Y] and [Z] can also be used.
e Push [(F-3)SELECT] to set the memory channel
as a select memory or not.
r Repeat steps w to e to program another memory
channel as a select memory channel, if desired.
t Push [EXIT/SET] to exit the memory channel
screen.
Setting select memory channels is also possible in
the scan screen.
ROLLROLL
SETSET
SELECTSELECT
NAMENAME
WIDEWIDE
SFTSFT
0
FIL2FIL2
USBUSB
qw:pp
TXTX
VFOVFO
USBUSB
USBUSB
USBUSB
FIL2FIL2
qr.qot.pp
qr.wpt.pp
14.100.0014.100.00
14.100.0014.100.00
1
1
ß
ß
VFOVFO
BWBW
2.4k2.4k
9999 --.---.----.---.-- ------------ ------
P1P1  0.500.000.500.00 LSBLSB FL2FL2 SCAN EDGESCAN EDGE
P2P2 29.999.9929.999.99 USBUSB FL2FL2 SCAN EDGESCAN EDGE
 1 ß 14.100.0014.100.00 USBUSB FL2FL2
 2 --.---.----.---.-- ------------ ------
 3 --.---.----.---.-- ------------ ------
 4 --.---.----.---.-- ------------ ------
MEMORYMEMORY
ANTANT
1
COMPCOMP
OFFOFF
WIDEWIDE
METERMETER
Po
P.AMPP.AMP
1
AGCAGC
MIDMID
ATTATT
OFFOFF
VOXVOX
OFFOFF
“ß” appears for select memory channel.
ROLLROLL
SETSET
SELECTSELECT
NAMENAME
WIDEWIDE
9999 --.---.----.---.-- ------------ ------
P1P1  0.500.000.500.00 LSBLSB FL2FL2 SCAN EDGESCAN EDGE
P2P2 29.999.9929.999.99 USBUSB FL2FL2 SCAN EDGESCAN EDGE
 1 ß 14.100.0014.100.00 USBUSB FL2FL2
 2 --.---.----.---.-- ------------ ------
 3 --.---.----.---.-- ------------ ------
 4 --.---.----.---.-- ------------ ------
MEMORYMEMORY
COMPCOMP
OFFOFF
WIDEWIDE
AGCAGC
MIDMID
VOXVOX
OFFOFF
“ ” appears when the memory
channel is selected.
ROLLROLL
SETSET
SELECTSELECT
NAMENAME
WIDEWIDE
SFTSFT
0
FIL2FIL2
USBUSB
qw:pp
TXTX
VFOVFO
USBUSB
USBUSB
USBUSB
FIL2FIL2
qr.qot.pp
qr.wpt.pp
14.100.0014.100.00
14.100.0014.100.00
1
1
VFOVFO
BWBW
2.4k2.4k
9999 --.---.----.---.-- ------------ ------
P1P1  0.500.000.500.00 LSBLSB FL2FL2 SCAN EDGESCAN EDGE
P2P2 29.999.9929.999.99 USBUSB FL2FL2 SCAN EDGESCAN EDGE
 1 14.100.0014.100.00 USBUSB FL2FL2
 2 --.---.----.---.-- ------------ ------
 3 --.---.----.---.-- ------------ ------
 4 --.---.----.---.-- ------------ ------
MEMORYMEMORY
ANTANT
1
COMPCOMP
OFFOFF
WIDEWIDE
METERMETER
PoPo
P.AMPP.AMP
1
AGCAGC
MIDMID
ATTATT
OFFOFF
VOXVOX
OFFOFF