Icom IC-756PRO2 - I Setting Power-On Time; I Setting Power-Off Period; I Timer Operation

63
8
CLOCK AND TIMERS
■ Setting power-off period
The transceiver can be set to turn OFF automatically
after being activated via the power-on timer. The
power-off period can be set to 5–120 min. in 5 min.
steps.
q Push [EXIT/SET] several times to close a multi-
function screen, if necessary.
w Push [EXIT/SET] for 1 sec. then [(F-4)TIME] to
enter timer set mode.
e Push [(F-2)Z] to select the Power-OFF Period
item.
r Set the desired power-off time using the tuning
dial.
•“TIMER – set Push [SET]” blinks.
t Push [(F-4)SET] to enter the set time.
•Push [EXIT/SET] to cancel the setting.
y Push [EXIT/SET] twice to exit timer set mode.
TIME SETTIME SET
é
è
SETSET
TimeTime (Now)(Now) 15:2415:24
TimerTimer FunctionFunction ONON
Power-ONPower-ON Timer SetTimer Set 19:3019:30
Power-OFFPower-OFFPeriodPeriod 45min45min
TIMER-setTIMER-set PushPush [SET][SET]
COMPCOMP
OFFOFF
WIDEWIDE
AGCAGC
MIDMID
VOXVOX
OFFOFF
TIME SETTIME SET
é
è
TimeTime (Now)(Now) 15:2415:24
TimerTimer FunctionFunction ONON
Power-ONPower-ON Timer SetTimer Set 19:3019:30
Power-OFFPower-OFFPeriodPeriod 60min60min
COMPCOMP
OFFOFF
WIDEWIDE
AGCAGC
MIDMID
VOXVOX
OFFOFF
■ Timer operation
q Preset the power-on time and power-off period as
described previously.
w Push [POWER] momentarily to turn the timer func-
tion ON.
•The [POWER] light lights when the timer function is
ON.
e Push [POWER] for 1 sec. to turn the power OFF.
•The [POWER] light lights continuously.
r When the set time arrives, the power is automati-
cally turned ON.
t The transceiver emits 10 beeps and turns OFF
after the power-off period elapses.
•The [POWER] light blinks while beeping.
•Push [POWER] momentarily to cancel the power-off
timer, if desired.
The timer function in timer set mode must be
turned ON to eanbles the timer operation. See
page 68 for details.
[POWER]
■ Setting power-on time
The transceiver can be set to turn ON automatically at
a specified time.
q Push [EXIT/SET] several times to close a multi-
function screen, if necessary.
w Push [EXIT/SET] for 1 sec. then [(F-4)TIME] to
enter timer set mode.
e Push [(F-1)Y] or [(F-2)Z] to select the Power-ON
Timer Set item.
r Set the desired power-on time using the tuning
dial.
•“TIMER–set Push [SET]” blinks.
t Push [(F-4)SET] to enter the set time.
•Push [EXIT/SET] to cancel the setting.
y Push [EXIT/SET] twice to exit timer set mode.
TIME SETTIME SET
é
è
TimeTime (Now)(Now) 15:2415:24
TimerTimer FunctionFunction ONON
Power-ONPower-ON Timer SetTimer Set 19:3019:30
Power-OFFPower-OFFPeriodPeriod 60min60min
TIMER-setTIMER-set PushPush [SET][SET]
SETSET
COMPCOMP
OFF
WIDEWIDE
AGCAGC
MIDMID
VOXVOX
OFFOFF
TIME SETTIME SET
é
è
TimeTime (Now)(Now) 15:2415:24
TimerTimer FunctionFunction ONON
Power-ONPower-ON Timer SetTimer Set  0:000:00
Power-OFFPower-OFFPeriodPeriod 60min60min
COMPCOMP
OFFOFF
WIDEWIDE
AGCAGC
MIDMID
VOXVOX
OFFOFF