Icom IC-M323 - Receiving a Position Request Call

46
7
DSC OPERATION
■ Making DSC calls
Making a Position Reply call (continued) D
Manual Reply:
Enter “POSITION REPLY” in the DSC CALLS menu. q
 •IfnoPositionRequestcallisreceived,thePositionReplyitem
will not be displayed.
 •Push[EXIT]toreturntothenormaloperatingmode.
 •Push[BACK]toreturntothepreviousscreen.
Select a desired Position Request call to reply to, using w
Dial or [Y]/[Z], then push Dial or [ENT].
The Position Reply call confirmation screen is displayed. e
Push [CALL] to make an acknowledgement call.
While transmitting the reply call, the screen shown below r
is displayed, and then returns to the normal operating
mode.
MENU ➪ DSC Calls ➪ Position Reply
(Push [MENU].) (Rotate Dial, then push [ENT].)