Icom IC-M330GE

44
7
DSC OPERATION
New2001
Self-Test
TheSelf-TestsendsDSCsignalstothereceivingAFcircuit
to compare the sending and receiving signals at the AF
level.
Push[ENT]tostarttheSelf-Test.
L When the sending and receiving DSC signals match, “OK” is
displayed.
Procedure (Default:Single)
(ForonlytheUSAversion)
You can select the type of task for the transceiver,
depending on the presetting.
Single: Handlesonly1taskatthesametime.
Multiple: Handlesupto7tasksatthesametime.
■ DSCSettings(Continued)