Icom IC-M72

22
7 SET MODE
New2001
DD
Voice scrambler code “”
(
available with some versions only)
There are 32 codes (1 to 32) available for programming. In
order to understand each other, all transceivers in your group
must share the same scrambler code.
D VOX gain “”
Adjusts the VOX gain level from 1 (low sensitivity) to 6 (high sen-
sitivity) when speaking with the optional headset.
D VOX delay “”
Sets the VOX delay timer (0.5 to 3.0 sec. in 0.5 sec. steps) so
that the transceiver keeps on transmitting after you stops
speaking.
Push
VOX delay 1.0 VOX delay 3.0
Push
VOX gain 1 (default) VOX gain 6
Push
Scramble code 1
(default)
Scramble code 32
IC-M72_1.qxd 06.1.11 18:20 Page 22 (1,1)