Icom IC-M88

■ LAND Channel Group
Amax.of22freeLANDmobilechannels(allocated146.000
to174.000MHz)canbeprogrammedintotheLANDchannel
group for simple communication with LMR transceivers in the
VHFband.
Moreover,anyofthemarinechannelsintheUSA,INTand
CANchannelgroupscanbeprogrammed.
ThedefaultsettingoftheLANDchannelgroupisthesame
asthatoftheINTchannelgroup.AskyourlocalIcomdealer
fortheLANDchannelgroupsettingandLMRfrequencypro-
gramming details.
qPush[CH/WX•
U/I/C/L] to select a regular channel.
 •Ifaweatherchannelappears,push[CH/WX•U/I/C/L]again.
wTochangethechannelgroup,push[CH/WX•U/I/C/L]for1
sec several times.
 •“ ”appearswhenLANDchannelgroupisselected.
e Push [Y]/[Z] to select a channel.
 •“DUP”appearsforduplexchannels.
Push
U/I/C/L
NOTE:Thebasicsettings(e.g.callchannelprogramming)
aresameastheU.S.A.,InternationalandCanadianchan-
nels. Refer to the appropriate pages for details.
■ Function display
WhenNarrow,DTCSorCTCSSisset,thedisplayshowsthe
indications as below.
Appears when DTCS is set.
Appears when CTCSS set.
Appears when Narrow chan-
nel spacing is set.
16
7
LAND CHANNEL OPERATION