108
11
OTHER FUNCTIONS
The [Audio Device] setting is necessary when the audio is
emitted via the built-in or connected PC speaker whenever
the USB cable is connected.
NOTE: The sound board should be installed into the PC to
hear sound via the PC speaker. Please refer to your PC’s
instruction manual for details.
q Click the zPowerx icon on the tool bar to disconnect the
Main unit, then turn the Main unit’s power OFF.
• The power indicator of the Main unit goes out.
● Microsoft
®
Windows
®
XP
wClick the [Start] button and click [Control Panel] in [My
computer].
eClick [Sounds, Speech, and Audio Devices], then click
[Sounds and Audio Devices].
rClick the [Audio] tab, and confirm the “Default device” in
[Sound playback].
• Making a note is recommended.
tClick the close button ([X]) to close the [Sounds and Audio
Devices Properties] screen.
☞ Continued to step y (as next page)
To Next Page
Loading...
