16
2
DRIVER INSTALLATION
■ Microsoft
®
Windows
®
98SE
qQuit all applications when Windows is running.
wConnect the Main unit to the desired PC’s USB port with
the supplied USB cable.
CAUTION: Icom Inc. assumes no responsibility for the
receiver’s operation resulting from the use of any other
USB cable other than the one supplied by Icom in the
original IC-PCR1500 or IC-PCR2500 package.
eInsert the CD into the appropriate CD drive.
rTurn the Main unit power ON.
• The power indicator lights.
tThe CP2101 USB device is detected automatically, and the
“Add New Hardware Wizard” will come up as below. Click
[Next>].
ySelect “Search for the best driver for your device. (Recom-
mended),” then click [Next>].
uSelect “Specify a location:”, click [Browse...].
To Next Page
Loading...
