59
5
BASIC RECEIVE FUNCTIONS
5
■ AFC function
The AFC (Automatic Frequency Control) function tunes the
displayed frequency automatically when an off-center fre-
quency is received. It activates in FM mode and IF filter set-
ting is 6 or 15 kHz only.
Click zAFCx to turn the AFC (Automatic Frequency Control)
function ON or OFF.
• “AFC” appears when the AFC function is turned ON
■ Attenuator function
Strong signals (such as from broadcast stations, pocket beep-
ers, nearby amateur radio stations, etc.) can cause distortion
of receive signals. The attenuator function can reduce signal
strength of interfering signals by approximately 20 dB.
This function cannot be used in 1300.000001 MHz or above.
Click zATTx to turn the ATT (Attenuator) function ON or OFF.
• “ATT” appears when the ATT function is turned ON.
To Next Page
Loading...
