111
11
OTHER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
D Multi channel monitor operation
q Click the zMulti CH Monitorx icon on the tool bar to call up
the [Multi CH Monitor] screen if it is not displayed.
• The channel name and frequency are displayed on the pro-
grammed channel.
w Click zZx to select the desired bank to monitor.
eClick the zSTARTx button to start scan.
While scanning, the receive audio is muted.
• “SCANNING” blinks in the information box.
• The zSTARTx button changes to the zSTOPx button while scan-
ning.
• The background color changes according to the receiving signal
strength level.
- Black : Non programmed or no signal channel.
- Dark gray: S-meter level is below S3.
- Pale gray : S-meter level is above S3/below S9.
- Red : S-meter level is above S9.
rClick the desired channel screen to monitor.
• Scan is cancelled.
tClick the zSTOPx button to stop the scan.
To Next Page
Loading...
