Icom IC-R5 - I Memory Bank Selection

18
5
MEMORY CHANNELS
New2001
5
■ Memory bank selection
qPush [V/M•S.MW•~] to select memory mode, if desired.
wWhile pushing [BAND• ], rotate [DIAL] to select the de-
sired bank
(A to H, J, L, N, O to R, T, U and Y)
.
• The bank can also be selected by pushing [BAND• ] several
times.
• The only programmed banks are displayed.
eRotate [DIAL] to select the bank channel.
• The only programmed channels are displayed.
rTo return to regular memory condition, rotate [DIAL] while
pushing
[BAND• ], or push [BAND• ] several times.
FM DUP SQLT
Bank initial
Bank chanel number
FM DUP SQLT
FM DUP SQLT
FM
FM
R
[V/M•S.MW•~]
[DIAL]
[BAND• ]
Rotate [DIAL] while
pushing [BAND• ]
Appears only the
programmed bank.
Auto write channels
IC-R5_1.qxd 02.10.23 11:28 Page 18 (1,1)