Icom IC-R5 - Section 9 Board Layouts

20
5
MEMORY CHANNELS
New2001
5
■ Selecting display type
During memory mode operation, one of the programmed
memory name, bank name or the channel number can be dis-
played instead of the frequency for your preference.
qPush [V/M•S.MW•~] to select memory mode.
• [BAND• ] to select the desired bank group.
wWhile pushing [FUNC], push [BAND• ] to select display
type from frequency, bank name, memory name and chan-
nel number indications.
DD
Selecting bank channel indication
During bank channel operation, the bank channel number can
also be displayed instead of the memory channel number in-
dication.
➥ After selecting channel number indication as described at
left, push [BAND• ] to select the desired bank.
FMFM
R
FM DUP SQLT FM DUP SQLT
Push [BAND• ]
Memory channel No. indication Bank channel No. indication
Bank channel No. indicationAuto write channel No.
FM DUP SQLT
FM DUP SQLT
FM DUP SQLT
FM DUP SQLT
[FUNC]
[BAND• ]
Push [BAND• ]
while pushing [FUNC]
When no memory or bank
name is programmed with the
selected memory channel,
frequency is displayed on the
function display.
IC-R5_1.qxd 02.10.23 11:28 Page 20 (1,1)