D-STAR 操作
52
D-STAR 指南
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
Step 3: Check whether you can access the repeater.
Hold down [PTT] for 1 second to access the repeater.
If you get a reply call, or “UR?” is displayed within 3 seconds, your signal reached your
access repeater and your call was successfully sent from your destination repeater.
TIP: See page 65 for status indications after a reply is received.
Successfully sent!
To Next Page
Loading...
