Icom ID-52A

D-STAR 操作
58
D-STAR 指南
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
■ 单呼
当在
“TO”（目的地）中选择了电台呼号时，您可以呼叫单个电台。
当您通过网关呼叫单个站台时，您的呼叫将自动发送到该站台访问的最后一个中继器。
因此，即使您不知道电台在哪里，也可以使用呼号路由发起呼叫。
Step 1: Set “FROM” (Access repeater).
 Same as described in page 56.
Step 2: Set “TO” (Destination).
1. Push D-pad() to select “TO,” and then push [ENT].
2. Select “Your Call Sign.”
3. Select your destination station.
• Returns to the DR screen, and the selected station name is displayed in “TO.”
Step 3: Hold down [PTT] to transmit.
1. Hold down [PTT] to transmit.
• The TX/RX indicator lights red while transmitting.
2. Release [PTT] to receive.