I Single Package Heat Pumps
FIGURE 13 I Blower Motor Speed Taps (4-Speed Motors)
I
Installation Instructions
BE SURE TO CHECK BLOWER MOTOR SPEED DATA IN THE I
I
Parts List.
NOTE: THE 21/2 CANNOT BE RUN AT THE LOW SPEED TAP
SETTING. SEE Parts List FOR MORE INFORMATION.
IMPORTANT NOTE: THE BLACK AND RED LEADS ARE UNDER 1 INSULATED QUICK CONNECT AT THE MO-
TOR TERMINAL BLOCK. THE RED LEAD IS FOR ELECTRIC HEATACCESSORY BLOWER INTERLOCK. THUS,
THE COOLING/HEAT PUMP/ELECTRIC HEAT MOTOR SPEED TAP WILL ALWAYS BE ON ONE SPEED TAP. IF
THE SPEED TAP IS ADJUSTED, THE COOLING/HEAT PUMP/ELECTRIC HEAT WILL ALL BE ADJUSTED TO THE
SAME AIRFLOWS.
To Next Page
Loading...
