ICS Nav6 User Manual

Page 16
Set the filter for each station to one of the following:
Setting Notes
On Messages from station always displayed
Off Messages from station never displayed
Auto Messages from station displayed only when nearest or in range
depending upon ‘Auto Station Filter’ setting.
Important: You may wish to leave your ICS NAV6 running whilst your GPS or
instrument system is switched off. Be aware that the Navigate data items derived
from NMEA (including position) will time out after a short while. If you have
chosen to display only the ‘nearest’ NAVTEX station or stations ‘in range’ it will
revert to displaying all stations that are set to ‘Auto’. As soon as the NMEA data
becomes available again only the ‘Nearest’ or ‘In Range’ stations will be displayed
dependant upon your current settings.

ICS Nav6 Specifications

Power

voltage range	10.8V to 15.6V
standby power consumption	1.5 W at 12V
printing power consumption	2.5 W at 12V

Operating Environment

operating temperature range	0 to +40°C
storage temperature range	-20 to +55°C
humidity	0 to 95%

Weight and Dimensions

weight without cable	1200 g
paper roll width	80mm
paper roll length	20m