ELECTRIC BICYCLE METER KT—LCD7C Product User Manual
- 14 -
Under the wheel diameter setting interface, if there’s no button operation on the
meter for more than 1 minute, and then the meter will automatically return to display
1, and the original set values will be saved.
After finishing the wheel diameter setting, press button (SW) to save the
current set specification and enter into the next setting.
○ Metric and Imperial Units
After finishing the wheel diameter setting, enter into the metric/imperial units setting
interface, and then the speed and mileage unit flash. Press button (UP) or
button (DOWN) to make sync selection of three metric/imperial units as speed, mileage,
and the environment temperature.
Setting Interface of Metric/Imperial Units
Definition Table of Metric/Imperial Units：
Under the metric/imperial units setting interface, if there’s no button operation
on the meter for more than 1 minute, and then the meter will automatically return to
display 1, and the original set units will be saved.
After finishing the metric/imperial units setting, press button (SW) to save the
current set values, and then speed and mileage units stop flashing. Press button (SW)
To Next Page
Loading...