ICT KT-LCD7C - C7 Cruise Function Setting; C8 Motor Operating Temperature Display Setting

ELECTRIC BICYCLE METER KT—LCD7C Product User Manual
- 24 -
1
Dimmest
2
Darker
3
Standard
4
Brighter
5
Brightest
After finishing C6 parameter setting, press button (SW) to save the current set
values and enter C7 parameter setting interface.
○ C7 Cruise Function Setting
Enter C7 parameter setting interface, C7 parameter column flashes.
C7 parameter setting interface
C7 is cruise function setting, the setting range is 0 or 1, press button (UP) or
button (DOWN) for selection.
C7 parameter definition table：
C7 value
Cruise function
0
Off
1
On
After finishing C7 parameter setting, press button (SW) to save the current set
values and enter C8 parameter setting interface.
○ C8 Motor Operating Temperature Display Setting
Enter C8 parameter setting interface, C8 parameter column flashes.