ICT KT-LCD7C - C6 Backlight Brightness Adjustment Setting

ELECTRIC BICYCLE METER KT—LCD7C Product User Manual
- 23 -
00
Three level slow start/ Maximum current value
01
Two level slow start/ Maximum current value
02
One level slow start/ Maximum current value
03
Maximum current value÷2.00
04
Maximum current value÷1.50
05
Maximum current value÷1.33
06
Maximum current value÷1.25
07
Maximum current value÷1.20
08
Maximum current value÷1.15
09
Maximum current value÷1.10
10
Maximum current value
When C5 setting is 10, maximum current value is controller maximum operating
current value (ie, limit current value); when setting is 9, maximum current value divided by
1.10, when setting is 8, maximum current value divided by 1.15 and so on.
After finishing C5 parameter setting, press button (SW) to save the current set
values and enter C6 parameter setting interface.
○ C6 Backlight Brightness Adjustment Setting
Enter C6 parameter setting interface, C6 parameter column flashes.
C6 parameter setting interface
C6 is the meter backlight brightness adjustment setting, the default value is 3, and
setting range is 1-5, press button (UP) or button (DOWN) for selection.
C6 parameter definition table：
C6 value
Backlight brightness