ELECTRIC BICYCLE METER KT—LCD7C Product User Manual
- 6 -
◇ Brake display ( );
◇ Turn on backlighting and lights ( );
◇ Environment temperature (℃ or ℉) display;
◇ Data clearing;
◇ Fault code display;
◇ User parameter setting
◇ 24V, 36V, 48V supply voltage can automatic identification and be compatible
Display Content
The display content is shown as follow.
Button Definition
KT-LCD7C meter adopts the structural form with part design buttons.
Normal Operation
○ On/Off
Hold button (SW) long, the meter is powered on and into normal operation, and
it provides the controller with power supply. Under normal operating status, hold
button (SW) long, the meter is powered off, meanwhile to shutdown the power supply of
controllers. When the vehicle is stopped and without any button operation on the
meter for five minutes, the meter will automatically shut down, and the power supply
of the electric vehicle will be powered off. In power off mode, the power consumption of
the meter and controller is zero.
To Next Page
Loading...