ICT KT-LCD7C - C9 Startup Password Setting

ELECTRIC BICYCLE METER KT—LCD7C Product User Manual
- 25 -
C8 parameter setting interface
C8 is motor operating temperature display setting, the setting range is 0 or 1, press
button (UP) or button (DOWN) for selection.
C8 parameter definition table：
C8 value
Motor operating temperature
0
Function off
1
Function on
Please Note：The motor operating temperature display requires installing temperature
sensor in the motor, output temperature detection signal simultaneously.
After finishing C8 parameter setting, press button (SW) to save the current set
values and enter C9 parameter setting interface.
○ C9 Startup Password Setting
Enter C9 parameter setting interface, C9 parameter column flashes.
C9 parameter setting interface
C9 is meter power-on password setting, the default value is 0, press button (UP)
or button (DOWN) for selection.
C9 parameter definition table：