66
Tilt- A-Way HYJG 1
Control Board Program Menu
8/15/2018
To Enter Main Menu press and hold button SW2 for about 4 seconds.
To view menus press and release button SW4 to scroll up, and SW3 to scroll down.
To enter menu, or submenu press and release button SW1.
To save changes to submenus press and release button SW1.
To exit submenus, or main menu press and release button SW2.
REALTIME STATUS. This menu is helpful for trouble shooting problems with
the gate system.
o Input Status. In this submenu you can view which inputs are active, or
inactive.
Input state open button “Input clear / Input asserted”
Input state close button “Input clear / Input asserted”
Input state stop button “Input clear / Input asserted”
Input state single button “Input clear / Input asserted”
Input state reverse open, terminal “Input clear / Input asserted”
Input state timer set “Input clear / input asserted”
Input state timer hold “Input clear / Input asserted”
Input state aux timer “Input cleat / Input asserted”
Input state UL reset (on board) “Input clear / Input asserted”
Input state remote (N.O. contact) “Contact open / Contact closed”
Input state remote (N.C. contact) “Contact open / Contact closed”
Input state loop slot #J3 “Input clear / Input asserted”
Input state loop slot #J5 “Input clear / Input asserted”
Input state loop slot #J7 “Input clear / Input asserted”
Input state auxiliary #1 “Input clear / Input asserted”
Input state auxiliary #2 “Input clear / Input asserted”
Input state leaf #1 close obstruct edge “Input clear / Input
asserted”
Input state leaf #1 open obstruct edge “Input clear / Input
asserted”
Input state leaf #1 close limit “Input clear / Input asserted”
Input state leaf #1 open limit “Input clear / Input asserted”
Input state leaf #2 close obstruct edge “Input clear / Input
asserted”
Input state leaf #2 open obstruct edge “Input clear / Input
asserted”
Input state leaf #2 close limit “Input clear / Input asserted”
Input state leaf #2 open limit “Input clear / Input asserted”
To Next Page
Loading...