iDM iPUMP A 2-7 - Filling Quantity Refrigerant; Maximum Heigth Difference

(C) IDM ENERGIESYSTEME GMBH
3
.
D
escriptio
n
Installation instructions iPump A 2-7, 3-11
24
Description
Montage Heizungsseitig
3.15. Filling quantity refrigerant
The iPump A 3-11 is pre-fi lled with refrigerant. Up to a distance of 6 m between indoor unit and outdoor unit no
refrigerant no additional needs to be refi lled. For pipe length more than 6 m, the following refrigerant quantities
must be refi lled.
Ϭ
Ϭϭ
ϬϮ
Ϭϯ
Ϭϰ
Ϭϱ
Ϭϲ
Ϭϳ
Ϭϴ
Ϭϵ
ϭ
ϭϭ
Ϭ Ϯ ϰ ϲ ϴ ϭϬ ϭϮ ϭϰ ϭϲ ϭϴ ϮϬ
ZĞͲĨŝůůƋƵĂŶƚŝƚLJŝŶ΀ŬŐ΁
WŝƉĞůĞŶŐƚŚŝŶŽŶĞĚŝƌĞĐƚŝŽŶ΀ŵ΁
ZĞĨƌŝŐĞƌĂŶƚƌĞͲĨŝůůƋƵĂŶƚŝƚLJŝWƵŵƉϯͲϭϭ
WŝƉĞůĞŶŐƚŚŝŶŽŶĞĚŝƌĞĐƚŝŽŶ΀ŵ΁ ZĞĨƌŝŐĞƌĂŶƚƋƵĂŶƚŝƚLJ΀ŬŐ΁ ZĞͲĨŝůůƋƵĂŶƚŝƚLJ΀ŬŐ΁
Ϭ
ϰϭϬ
Ϭ
ϲ
ϰϭϬ Ϭ
ϭϬ
ϰϰϬ ϬϯϬ
ϭϱ ϰϴϬ ϬϳϬ
ϮϬ ϱϮϬ ϭϭϬ
3.16. Maximum heigth difference
If the height diff erence between the indoor unit and outdoor unit is lower than 5 m no oil elevation arc must be
installed before the inclination. In case of a higher height diff erence the installation must be done after 5 m. The
oil elevation arc must be installed by a certifi cated service technician. Whether the indoor unit or the outdoor
unit is higher, does not matter. The maximum height diff erence between indoor unit and outdoor unit is 10 m.
Version 1
Version 2
max 5 m
<5 m
max 5 m
max 5 m
max 5 m
Height diff erence lower than 5 m
Height diff erence more than 5 m