IDS X64 Quick Programming Guide

IDS X64 Quick Programming Guide 700-398-03A Issued August 2010
30
LOCATION 573
Global Split Reporting 3
[#] [INSTALLER CODE] [*] [5] [7] [3] [*] [BITMAP] [*]
LED
On/Off
Action
LED
On/Off
Reporting Pair
1
ON
Enable aux 12V fuse restore
reporting*
9
ON
Telephone module 2
OFF
Disable aux 12V fuse restore
reporting*
OFF
Telephone module 1
2
ON
Reserved
10
ON
Reserved
OFF
Reserved
OFF
Reserved
3
ON
Enable box tamper restore
reporting *
11
ON
Telephone module 2
OFF
Disable box tamper restore
reporting *
OFF
Telephone module 1
4
ON
Enable bus-wired peripheral
tamper restore reporting*
12
ON
Telephone module 2
OFF
Disable bus-wired peripheral
tamper restore reporting*
OFF
Telephone module 1
5
ON
Enable bus-wired peripheral
fail restore reporting *
13
ON
Telephone module 2
OFF
Disable bus-wired peripheral
fail restore reporting *
OFF
Telephone module 1
6
ON
Enable bus-wired peripheral
low battery restore
reporting**
14
ON
Telephone module 2
OFF
Disable bus-wired peripheral
low battery restore
reporting**
OFF
Telephone module 1
7
ON
Enable dedicated panic
reporting
15
ON
Telephone module 2
OFF
Disable dedicated panic
reporting
OFF
Telephone module 1
8
ON
Enable auto test reporting
16
ON
Telephone module 2
OFF
Disable auto test reporting
OFF
Telephone module 1
Default values are shaded
*The reporting code is only supported by Contact ID or SIA, and thus will not be reported if any other
format has been selected.
** The reporting code is only supported by Contact ID, and thus will only be reported if Contact ID has
been selected.

IDS X64 Specifications

General

Keypads	8
Stay/Away Arming	Yes
Tamper Protection	Yes
Operating System	Proprietary
Supported Protocols	Contact ID, SIA
Power Supply	16.5VAC
Backup Battery	12VDC 7Ah
Alerts	SMS
RAM	Unknown