IEI Technology ACCURA9 User Manual

１１
ACCURA9/9L INSTRUCTION MANUAL
7.2 Mode selecting
When power-switch is on, the mode screen appears after the title screen. In case of power off on the last
time, go to the mode directly as it was.
Display of LCD Screen 
ModeSelectionscreen
S
***MODE  SELECT***
***AUTO***viscosit
y
stead
y

********************
Functions
Selection and operation of each mode
Select the mode with
the mode key
. During selecting the mode, the mode is shown in capital letters
and circled by “***”.
Press
the return-key
after selection of
the mode-key
to carry out each mode.
Finish each mode
Press
H+Mode key
to finish each mode.
And then appear the mode selection screen.
Clear the data for all channels
Press
CTRL+CLR RESET keys
to clear the data for all channels.
DATACLEAR?
YES..RETURN

NO..CLRRST
MessegeConfirmation
A confirmation message appears on the screen when
enter the key. Press
Return key
for ‘carry-on’, and press
CLR Reset key
for ‘cancel’.

IEI Technology ACCURA9 Specifications

General

Brand	IEI Technology
Model	ACCURA9
Category	Dispenser
Language	English