IEI Technology ACCURA9 User Manual

５３
ACCURA9/9L INSTRUCTION MANUAL
10.2.2 Output Signal
Power-on Signal
(I/O PORT2 5PIN)
5PIN Output Condition
１
Output after switching on.
０
Output after switching off.
AUTO SIGNAL
(I/O PORT2 23PIN)
23PIN OUTPUT CONDITION
１
Output at the time of Auto Mode.
０
Output at the time except on Auto Mode.
STEADY MODE
(I/O PORT2 4PIN)
4PIN OUTPUT CONDITION
１
Output at the time of Steady Mode.
０
Output at the time except on Steady Mode.
BUSY SIGNAL (I/O PORT2 24PIN)
24PIN OUTPUT CONDITION
０
Output when the controller is available to accept Input signal.
１
Output (*1) when the controller is unavailable to accept Input
signal with exceptions of follows: 1. Available to accept only ’0’
signal during dispensing in Steady Mode. 2. Available to accept
only ‘Shot-Off’ signal during dispensing in Auto Mode.
（※１）
During dispensing (incl. vacuum time and shot time) and changing channel.
Remark
:
There might is time lag in a few metric-seconds to turn ‘1’ on the busy signal after
being accepted the input signal by the dispenser controller.
Pay attention when checking BUSY signal.

IEI Technology ACCURA9 Specifications

General

Brand	IEI Technology
Model	ACCURA9
Category	Dispenser
Language	English