IEMCA MASTER 880 MP-E - Page 24

GB
2 - TECHNICAL INFORMATION MASTER 880MP E-volution
2 - Pag. 14 / 19
Table 4. General technical specifications
MASTER 880 MP Evolution
Round bar diameter
Ø min 8 mm
(5/16")
Ø max 80 mm
(3")
Hex bar diameter
min 10 mm
(5/16")
max 50 mm
(2"1/4)
Max bar lenght
min 7 mm
(5/16")
max 65 mm
(2")
Min bar lenght
1000 mm
Max bar length
Mod. 33 – 3300 mm (10,8 ft)
Mod. 38 – 3800 mm (12,4 ft)
Mod. 43 – 4300 mm (14,1 ft)
Magazine capacity
(maximum allowable load)
~360 kg
Magazine capacity
(Working width)
270÷320 mm (es. n° 34 bars
with a diameter Ø 8 mm,
n° 4 bars with a diameter Ø 80
mm)
Remnant max. length
Ø 8÷65 = 400 mm
Ø 66÷80 = 250 mm
Bar change-over time (with 3000 mm bar)
30 sec (varying according to the
bar diameter)
(Adjustable) feeding speed
150 mm/sec
(Adjustable) return speed
950 mm/sec
Imput voltage
230/400 Volt
Control voltage
24 Volt A.C. – 24 Volt D.C.
Installed power
3 kW
Air pressure
6 bar
Oil quantity
80 l
Air consumption
6 Nl/min
Bar feeder weight
Mod. 33 – 1360 kg.
Mod. 38 – 1440 kg.
Mod. 43 – 1520 kg.