GB
6 - USE AND OPERATION MASTER 880MP E-volution
6 - Pag. 2 / 17
6.1 DESCRIPTION OF THE CONTROLS
INFORMATION:
from the hand-held keyboard it is possible to start automatically the bar feeder,
even when lathe 'MAN/AUT' signal is in Manual mode.
INFORMATION:
When Automatic mode is on, the bar feeding is possible only when lathe
'MAN/AUT' signal is in Automatic mode.
INFORMATION:
Pressing Manual mode button it is possible to prevent the bar feeder automatic
start by the lathe.
To Next Page
Loading...
