GB
6 - USE AND OPERATION MASTER 880MP E-volution
6 - Pag. 8 / 17
6.5 BARS TO BE MACHINED - CHARACTERISTICS AND PREPARATION
CAUTION:
do not feed bars having different sizes than the manufacturer's prescribed
sizes.
Table 1. Maximum bar length
Model Version MAX Length mm (ft) MIN Length mm (ft)
33 3300 (10,8)
38 3800 (12,4)
MASTER
880 MP
Evolution
43 4300 (14,1)
1000 (3,2)
INFORMATION:
Bar must not present a straightness defect above 0.5 per 1000.
Please find herewith some advice to optimise the bar feeder performances.
Usually barstocks do not need any preliminary operations to be carried out on ends,
nevertheless to obtain the best results when loading them, it is advisable to chamfer them.
To Next Page
Loading...
