4 - MOVEMENT AND INSTALLATION VIP80E-II
EN
4 - Pag. 21 / 22
4.10.2 BAR FEEDER HANDLING WITHOUT POWER SUPPLY
Without power supply or in case of an emergency it
is possible to move the pneumatic units using the
solenoid valves manually:
- keep button (A) pressed;
- using a small screwdriver press the buttons (B),
present on the individual solenoid valves, to
move the unit.
INFORMATION:
For the movement description of each
solenoid valve, refer to paragraph 4.10
"Pneumatic device layout".
8070_04_24_1
A
B
B
B
B
B
B
To Next Page