Ier I420 - 3.2 KEYBOARD; 3.2.1 PRINTER IN ON LINE MODE

i420
User Guide
Ce document est la propriété d'IER et ne doit pas être reproduit ou communiqué sans autorisation écrite
This document is the property of IER and may not be reproduced or communicated without prior written
authorization.
Page 23
N0L802A1
3.2 KEYBOARD
The assignment of the keyboard keys depends on the overall status of the
signaling and the operating mode, as described in the following tables.
3.2.1 PRINTER IN ON LINE MODE
When the printer is in ON LINE mode, the assignment of the keyboard keys is
the following.
Signaling
Key
Action
Active rest
signaling
On Line
Switches to OFF LINE mode. Effectiveless if a
transaction is in progress.
Unload
Press longer than 2 s to unload the media.
Effectiveless if a transaction is in progress.
Feed
No action
Reset
No action
Warning,
minor default or
technical default
signaling
On Line
Acknowledges warnings or defaults. In case of a
technical default, the printing module is asked to
try to cancel the fault. In all cases, the HMI
remains in ON LINE mode.
Unload
No action
Feed
No action
Reset
Acknowledges warnings or defaults. In case of a
technical default, the printing module is asked to
try to cancel the fault. In all cases, the HMI
remains in ON LINE mode.