English
33
Error displayed Meaning and solutions
“NO WATER” with a short audio signal
ERROR E2 with a short audio signal
The dishwasher does not ll with water
• Make sure the water supply is open.
• Make sure the water supply hose is not bent or
crushed.
• Make sure the drain pipe is at the proper height
(see installation section).
• Close the water supply, unscrew the drain pipe
from the back of the dishwasher and check that
ERROR E3 with a short audio signal The dishwasher does not drain water
• Make sure the drain pipe isn’t bent, trapped or
• Make sure the siphon is not clogged.
ERROR E4 with a short audio signal
Water leak
Make sure the drain pipe isn’t bent, trapped or
Make sure the siphon is not clogged.
ERROR E8 with a short audio signal The water heating element is not working correct-
ly or the lter plate is clogged
ERROR E18 with a short audio signal Water level problems
ERROR E21 with a short audio signal Uncontrolled water supply with open solenoid valve.
Close the water tap immediately and disconnect the
appliance from the power supply.
Any other code
Turn on the machine and restart a program. If the
error occurs again contact an Authorized Customer
Service Centre directly.
Other faults
FAULTS CAUSE SOLUTION
1. No programme works Plug not connected to wall socket Connect electric plug
ON/OFF button not pressed Press button
Door is open Close door
No electricity
To Next Page
Loading...
