ILX Lightwave LDC-3900 User Manual

ERROR MESSAGES
176 LDC-3900 Series
CHAPTER 5

Table 5.2
LDC-3900 Modular Laser Diode Controller Error Message Codes
Error Code Explanation
E-001 Memory allocation failure.
E-101 <program mnemonic> is too long.
E-102 <PROGRAM MESSAGE UNIT> is too long.
E-103 <DEFINITE LENGTH ARBITRARY BLOCK PROGRAM DATA> length too long.
E-104 <NON-DECIMAL NUMERIC PROGRAM DATA> type not defined.
E-105 <DECIMAL PROGRAM DATA> exponent not valid.
E-106 <DECIMAL PROGRAM DATA> digit expected.
E-107 <DECIMAL PROGRAM DATA> digit not expected.
E-108 <DECIMAL PROGRAM DATA> more than one decimal point.
E-109 <DECIMAL PROGRAM DATA> more than one exponential indicator (E).
E-110 <SUFFIX PROGRAM DATA> must have digit following sign.
E-111 <SUFFIX PROGRAM DATA> must have alpha character following operator.
E-113 <ARBITRARY BLOCK PROGRAM DATA> length less than digit count.
E-114 <DEFINITE LENGTH BLOCK PROGRAM DATA> premature end of data.
E-115 <PLACEHOLDER PROGRAM DATA> identifier not valid.
E-116 Parser syntax error, character was not expected.
E-120 <program mnemonic> Lookup, word as part of a header path, has no commands.
E-121 <program mnemonic> Lookup, word as part of a header path, is not found.
E-122 <program mnemonic> Lookup, cannot find a null entry.
E-123 <program mnemonic> Lookup, word within context of current path, is not found.
E-124 <program mnemonic> Lookup, failed because query/command type match failed.
E-125 <program mnemonic> Lookup, word within context of common command path, is not
found.
E-126 Too few or too many program data elements.
E-201 <PROGRAM DATA> value out of range.
E-202 <PROGRAM DATA> will not convert to valid type.
E-203 Security violation, command is not available without clearance.
E-204 <PROGRAM DATA> suffix type is not valid.
E-205 <PROGRAM DATA> is not a Boolean value or word.
E-206 <PROGRAM DATA> will not convert to a signed 16-bit value.
E-207 <PROGRAM DATA> will not convert to an unsigned 16-bit value.
E-208 <PROGRAM DATA> will not convert to a signed 32-bit value.
E-209 <PROGRAM DATA> will not convert to an unsigned 32-bit value.
E-210 <PROGRAM DATA> will not convert to a floating point value.
E-211 <PROGRAM DATA> will not convert to a character value.
E-212 <PROGRAM DATA> will not convert to a byte array pointer.
E-213 <PROGRAM DATA> is incorrect block data length.
E-214 <PROGRAM DATA> length exceeds maximum.

ILX Lightwave LDC-3900 Specifications

General

Brand	ILX Lightwave
Model	LDC-3900
Category	Controller
Language	English