Immergas SUPER TRIO - Page 12

12
INSTALLERUSER
MAINTENANCE TECHNICIAN
14
c
d3
14
13
9
• Hang the hydronic unit (c) on the
central bracket of the Super Trio.
Secure the position of the hydronic
unit by fastening the screws (d3) on
the provided bracket (Fig. 10).
• Hang the storage tank (b) on the
central bracket on the Super Trio.
Attention: the xing screws (d3) are
present in the accessories group.
Secure the position of the storage tank
by tightening the screws (d2) on the
provided bracket (Fig. 9).
Attention: the xing screws (d2) are
present inside the connection kit.
10
12
11
b
d2
12