Dear Customer,
Congratulations for having chosen a top-quality Immergas product, able to assure well-being and safety for a long period of time. As an
Immergas Customer, you can also count on a qualied aer-sales service, prepared and updated to guarantee constant eciency of your
"Super Trio" kit. Read the following pages carefully: you will be able to draw useful tips on the proper use of the device, compliance with which
will conrm your satisfaction with the Immergas product.
For assistance and routine maintenance, contact Authorised Immergas Service Centres: they have original spare parts and are specically
trained directly by the manufacturer.
General warnings
All Immergas products are protected with suitable transport packaging.
e material must be stored in a dry place protected from the weather.
e instruction booklet is an integral and essential part of the product and must be given to the new user in the case of transfer or succession
of ownership.
It must be stored with care and consulted carefully, as all of the warnings provide important safety indications for installation, use and
maintenance stages.
is instruction manual provides technical information for installing the Immergas pack. As for the other issues related to pack installation
(e.g. safety in the work site, environment protection, injury prevention), it is necessary to comply with the provisions specied in the regulations
in force and good practice rules.
In compliance with legislation in force, the systems must be designed by qualied professionals, within the dimensional limits established
by the Law. Installation and maintenance must be performed in compliance with the regulations in force, according to the manufacturer's
instructions and by professionally qualied sta, intended as sta with specic technical skills in the system sector, as envisioned by the Law.
Improper installation or assembly of the Immergas appliance and/or components, accessories, kits and devices can cause unexpected problems
for people, animals and objects. Read the instructions provided with the product carefully to ensure proper installation.
Maintenance must be carried out by skilled technical sta. e Immergas Authorised Aer-sales Service represents a guarantee of qualications
and professionalism.
e appliance must only be destined for the use for which it has been expressly declared. Any other use will be considered improper and
therefore potentially dangerous.
If errors occur during installation, operation and maintenance, due to non-compliance with technical laws in force, standards or instructions
contained in this book (or however supplied by the manufacturer), the manufacturer is excluded from any contractual and extra-contractual
liability for any damage and the appliance warranty is invalidated.
For further information regarding legislative and statutory provisions relative to the installation of gas heat generators, consult the Immergas
site at the following address: www.immergas.com
e company IMMERGAS S.p.A., with registered oce in via Cisa Ligure 95 42041 Brescello (RE), declares that the design, manufac-
turing and aer-sales assistance processes comply with the requirements of standard UNI EN ISO 9001:2015.
For further details on the product CE marking, request a copy of the Declaration of Conformity from the manufacturer, specifying the
appliance model and the language of the country.
e Kit consists of separate units, some of which are excluded from this supply to allow the correct combination of features. Below are
the possible combinations through which the system is able to meet the winter central heating / C.H., summer cooling requirements, as
well as the production of domestic hot water:
Standard supply
Hydronic group
1 direct zone
160 litre storage tank unit
Storage tank
Magis Pro - Magis Pro V2 coupling kit
Excluded from this supply
Super Trio Container
Magis Pro - Magis Pro V2
Magis Combo Plus - Magis Combo Plus V2
Magis Combo Plus - Magis Combo Plus V2 coupling kit
Additional kit 2nd mixed zone
Solar heating coupling kit
Inertial storage tank kit
e manufacturer declines all liability due to printing or transcription errors, reserving the right to make any modications to its technical
and commercial documents without forewarning.