1 Boiler installation ................................................ 3
1.1 Installation recommendations. ......................... 3
1.2 Main dimensions. ............................................... 4
1.3 Anti-freeze protection. ....................................... 4
1.4 Connection unit
(supplied as standard with the boiler).............. 5
1.5 Remote controls and room
chrono-thermostats (Optional). .......................6
1.6 External temperature probe (Optional). ..........6
1.7 Immergas ue systems. ...................................... 7
1.8 Tables of Resistance Factors and Equivalent
Lengths. ................................................................ 7
1.9 Outdoor installation in
partially protected area. .....................................9
1.10 Horizontal concentric kit installation. ...........10
1.11 Vertical concentric kit installation. ................11
1.12 Separator kit installation. .................................12
1.13 Adapter kit installation C9. ............................13
1.14 Ducting of ues or technical slots. .................14
1.15 Conguration type B
23
open chamber and
forced draught for inside..................................14
1.16 Flue exhaust to ue/chimney. ..........................14
1.17 Flues, chimneys, chimney caps and
terminals. ...........................................................15
1.18 System lling. .................................................... 15
1.19 Filling the condensate trap. .............................15
1.20 Gas system start-up. .........................................15
1.21 Boiler start up (ignition). .................................15
1.22 Circulation pump. ............................................. 16
1.23 Kits available on request. .................................17
1.24 Boiler components. ...........................................17
INDEX
USER page
2 Instructions for use and Maintenance. ..........18
2.1 Cleaning and maintenance. .............................18
2.2 General warnings. .............................................18
2.3 Control panel. ....................................................18
2.4 Description of functioning states. ..................19
2.5 Using the boiler. ................................................20
2.6 Fault and anomaly signals. ...............................21
2.7 Boiler shutdown. ...............................................22
2.8 Restore heating system pressure. .................... 22
2.9 Draining the system..........................................22
2.10 Anti-freeze protection. ....................................22
2.11 Case cleaning. .................................................... 22
2.12 Decommissioning. ............................................22
2.13 Parameters and information menu. ............... 23
Immergas S.p.A. declines all liability due to printing or transcription errors, reserving the right to make any modications to its technical and commercial
documents without forewarning.
3 Boiler commissioning (initial check) .............25
3.1 Hydraulic Diagram. ..........................................25
3.2 Wiring diagram. ................................................26
3.3 Troubleshooting. ...............................................26
3.4 Converting the boiler to other types of gas. ..27
3.5 Calibration of number of fan revs. ................. 27
3.6 Adjustment of the air-gas ratio. ...................... 28
3.7 Checks following conversion to
another type of gas. ...........................................28
3.8 Programming the P.C.B....................................29
3.9 “Chimney sweep function”. ..............................31
3.10 Pump anti-block function. .............................. 31
3.11 three-way anti-block function.........................31
3.12 Radiators anti-freeze function. .......................31
3.13 P.C.B. periodical self-check. ............................31
3.14 Automatic vent function. ................................. 31
3.15 Solar panels coupling function. ......................31
3.16 Yearly control and maintenance of the
appliance. ........................................................... 31
3.17 Casing removal. .................................................32
3.18 Variable heat power. .........................................33
3.19 Combustion parameters. .................................33
3.20 Technical data. ...................................................34
INSTALLER page MAINTENANCE TECHNICIAN page
DECLARATION OF CONFORMITY
For the purpose and eect of the 2009/142/CE Gas Appliance Directive, 2004/108/CE EMC Directive, 92/42/CE Eciency Directive and 2006/95/
CE Low Voltage Directive.
e Manufacturer: Immergas S.p.A. v. Cisa Ligure n° 95 42041 Brescello (RE)
DECLARES THAT: the Immergas boiler model:
Victrix Superior TOP 32 E
is in compliance with the same European Community Directives
Mauro Guareschi
Research & Development Director
Signature:
Dear Client,
Our compliments for having chosen a top-quality Immergas product, able to assure well-being and safety for a long period of time. As an Immergas customer
you can also count on a qualied aer-sales service, prepared and updated to guarantee constant eciency of your boiler. Read the following pages carefully: you
will be able to draw useful suggestions regarding the correct use of the appliance, the respect of which, will conrm your satisfaction for the Immergas product.
Contact our area authorised aer-sales centre as soon as possible to request commissioning. Our technician will verify the correct functioning conditions; he
will perform the necessary calibrations and will demonstrate the correct use of the generator.
For any interventions or routine maintenance contact Immergas Authorised Centres: these have original spare parts and boast of specic preparation directly
from the manufacturer.
General recommendations
e instruction book is an integral and essential part of the product and must be consigned to the new user also in the case of transfer or succession of ownership.
It must be stored with care and consulted carefully, as all of the warnings provide important safety indications for installation, use and maintenance stages.
In compliance with legislation in force, the systems must be designed by qualied professionals, within the dimensional limits established by the Law. Installation
and maintenance must be performed in compliance with the regulations in force, according to the manufacturer's instructions and by professionally qualied
sta, intending sta with specic technical skills in the plant sector, as envisioned by the Law.
Incorrect installation can cause injury to persons and animals and damage to objects, for which the manufacturer is not liable. Maintenance must be carried
out by skilled technical sta. e Immergas Authorised Aer-sales Service represents a guarantee of qualications and professionalism.
e appliance must only be destined for the use for which it has been expressly declared. Any other use will be considered improper and therefore potentially
dangerous. If errors occur during installation, operation and maintenance, due to non compliance with technical laws in force, standards or instructions
contained in this book (or however supplied by the manufacturer), the manufacturer is excluded from any contractual and extra-contractual liability for any
damages and the appliance warranty is invalidated. For further information regarding legislative and statutory provisions relative to the installation of gas
heat generators, consult the Immergas site at the following address: www.immergas.com.
To Next Page
Loading...
