Inficon VGC501 - Page 83

tina96e1-b (2016-12) VGC501_VGC502_VGC503.om 83
Transmit: OFS [,a,sx.xxxxEsxx] <CR>[<LF>]
Description
a Mode, a =
0 –> Off (default)
No offset value needs to be entered
1 –> On
If no offset value has been entered, the pre-
viously defined offset value is taken over
2 –> Auto (offset measurement)
No offset value needs to be entered
3 –> Zero adjustment CDGxxxD
No offset value needs to be entered
sx.xxxxEsxx Offset
1)
, [in current pressure unit]
(default = 0.0000E+00)
s = sign
1)
Values can be entered in any format. They are internally converted
into the floating point format.
Receive: <ACK><CR><LF>
Transmit: <ENQ>
Receive: a,sx.xxxxEsxx <CR><LF>
Description
a Mode
sx.xxxxEsxx Offset
1)
, [in current pressure unit]
s = sign
OFS - Offset correction
(linear gauges, VGC501 only)