Inficon VGC501 - Page 82

82 tina96e1-b (2016-12) VGC501_VGC502_VGC503.om
Transmit: OFC [,a,b,c] <CR>[<LF>]
Description
a Offset correction gauge 1, a =
0 –> Off (default)
1 –> On
2 –> Determine offset value and activate offset correction
3 –> Adjust the zero of linear gauge
b Offset correction gauge 2
c Offset correction gauge 3
Receive: <ACK><CR><LF>
Transmit: <ENQ>
Receive: a,b,c <CR><LF>
Description
a Offset correction gauge 1
b Offset correction gauge 2
c Offset correction gauge 3
Transmit: OFD [,sa.aaaaEsaa,sb.bbbbEsbb,sc.ccccEscc] <CR>[<LF>]
Description
sa.aaaaEsaa Gauge 1 Offset
1)
, [in current pressure unit]
(default = 0.0000E+00) (s = sign)
sb.bbbbEsbb Gauge 2 Offset
1)
(s = sign)
sc.ccccEscc Gauge 3 Offset
1)
(s = sign)
1)
Values can be entered in any format. They are internally converted
into the floating point format.
Receive: <ACK><CR><LF>
Transmit: <ENQ>
Receive: sa.aaaaEsaa,sb.bbbbEsbb,sc.ccccEscc <CR><LF>
Description
sa.aaaaEsaa Gauge 1 Offset
1)
(s = sign)
sb.bbbbEsbb Gauge 2 Offset
1)
(s = sign)
sc.ccccEscc Gauge 3 Offset
1)
(s = sign)
OFC - Offset correction
(linear gauges)
OFD - Offset display
(linear gauges)