Inficon VGC501 - Page 88

88 tina96e1-b (2016-12) VGC501_VGC502_VGC503.om
Transmit: DCC [,a] <CR>[<LF>]
Description
a Contrast in percent, a = 0 … 100
100% = full contrast
Receive: <ACK><CR><LF>
Transmit: <ENQ>
Receive: a <CR><LF>
Description
a Contrast
Transmit: DCS [,a] <CR>[<LF>]
Description
a Screensaver, a =
0 –> Off (default)
1 –> After 10 minutes
2 –> After 30 minutes
3 –> After 1 hour
4 –> After 2 hours
5 –> After 8 hours
6 –> The backlight is switched off completely
after 1 minute
Receive: <ACK><CR><LF>
Transmit: <ENQ>
Receive: a <CR><LF>
Description
a Screensaver
Transmit: ERA [,a] <CR>[<LF>]
Description
a Switching behaviour error relay, a =
0 –> Switches for all errors (default)
1 –> Only unit errors
2 –> Error sensor 1 and unit error
3 –> Error sensor 2 and unit error
4 –> Error sensor 3 and unit error
Receive: <ACK><CR><LF>
Transmit: <ENQ>
Receive: a <CR><LF>
Description
a Switching behaviour error relay
DCC - Display control contrast
DCS - Display control
screensaver
ERA - Error relay allocation