Graphical User Interface
User’s Manual 18 Rev. 1.2, 2013-06-06
Software Description for Evaluation Kits
of the button changes to “Power is Off. Pressing the button again will turn on the power of the sensor and the name
of the button will change back to “Power is On”. Turn off the power of the sensor is recommended before the
sensor or the Evaluation Board is removed.
Figure 13 Data window
Tab-Window
Display of
Current [A]
Status of
Overcurrent
Graph of
Current
List of Status
Information
Sample Rate
Trigger for
Graph
To Next Page
Loading...
