Infineon PGSISI-2 - Figure 15 Sensor Specific Elements; Figure 16 Drop down Menu for Graph

Graphical User Interface
User’s Manual 20 Rev. 1.2, 2013-06-06
Software Description for Evaluation Kits
The status information is displayed as a list in the field “List of Status Information”.
The update rate of the graphical elements may lag on computer with low processing power. To avoid a hang-up
of the PC select a low sample rate. By default the sample rate is 100 Samples per second.
On the right side of the window, a so-called tabbed window is shown. The tabbed window contains two tabs, i.e.
“Sensor Parameters” and “Data View”, respectively. Both tabs are described in Chapter 4.2.1.1 and
Chapter 4.2.2.
Figure 15 Sensor specific elements
Figure 16 Drop down menu for graph
Tab-Window
Display of
Current [A]
Status of
Overcurrent
Graph of
Current
List of Status
Information
Sample Rate
Trigger for
Graph