60
Copyright © 2004-2012 by InfiNet Wireless
This section contains parameters related to network operation:
• ethX settings – Ethernet interface settings (e.g. eth0):
o Up enables/disables the interface
o DHCP allows DHCP client operation on the current interface
o Mode enables automatic or manual speed and duplex setup for the
Ethernet interface. Recommended setting is Auto.
o IP-address field allows user to assign an IP-address to the Ethernet
interfcace. Click the button to assign alias addresses or click Х
button to remove existing aliases.
o Description field can be used to add a text note to the interface
config (up to 72 characters).
• rfX Settings - RF interface settings (e.g. rf5.0). Same as the Ethernet
settings described above.
To Next Page
Loading...
