70
Copyright © 2004-2012 by InfiNet Wireless
This section focuses on managing traffic prioritization. The Auto Prioritization
subsection contains AutoQos settings:
• RTP Packets – enables/disables automatic prioritization for all RTP traffic
regardless of source or destination IP.
• Dot1p Tags – enables/disables automatic prioritization for packets tagged
with IEEE 802.1p priority tags.
• Tunnel Prioritization – enables/disables automatic prioritization for tunnel
traffic.
• IP ToS – enables/disables automatic prioritization for packets with a non-
zero ToS field.
• TCP Acknowledgements – enables/disables automatic prioritization for
TCP ACK packets.
Miscellaneous subsection handles other QoS-related options:
• Strict Prioritization – enables Strict Prioritization traffic control policy. By
default Weighted Fair Queue policy is used. Refer to WNAFleX OS
Manual for detailed policy descriptions.
• ICMP Prioritization – enables/disables automatic prioritization for ICMP
packets.
The Extra commands section allows users to take advantage of the CLI
configuration flexibility while keeping the web-interface as the main device
management tool. While the web-interface is simple to use and understand,
there are several parameters that can be configured via CLI only. However if any
configuration changes are introduced via the web-interface later on, the
configuration re-initializes and all CLI-configured parameters are reset to default.
Use this section to add CLI-specific commands to the configuration in order to
preserve the fine-tuning settings.
• Command menu – selects the command to add to the device configuration
.
• Parameters – use this string to specify command parameters and options .
To Next Page
Loading...
Need help?
General
