68
Copyright © 2004-2012 by InfiNet Wireless
Click Add SNMP v3 User to setup SNMP v3 operation.
• User Name – the username for the new SNMP v3 user.
• Password – new user's password. Must be at least 8 characters long.
• Security – three security levels are available for each SNMP v3 user:
o No Authorization No Privacy – SNMP messages are sent
unauthorized and unencoded.
o Authorization No Privacy – SNMP messages are sent authorized
and unencoded.
o Authorization and Privacy – SNMP messages are sent
authenticated and encoded. The passphrase for the encoding
can be set using the Privacy Password field.
• Readonly – this checkbox toggles Write operations restriction for the
current user.
• Admin – toggles full access to all variables. By default all users have
limited access.
• Remove User – removes the user from the SNMP configuration.
To Next Page
Loading...
