How to brighten a dark image on InfiRay Measuring Instruments?
If the image is too dark on your InfiRay Measuring Instruments, the display brightness level might be too low. You can adjust the display brightness in the quick menu to resolve this.
What to do if InfiRay FINDER FH35R V2 won't connect to my phone?
If your InfiRay FINDER V2 Measuring Instruments won't connect to your mobile device, here are a few things to check: * Make sure Wi-Fi is turned on in the main menu. * Verify that you've entered the correct Wi-Fi password by going to Settings > Wi-Fi on your mobile device. * Too many Wi-Fi signals near the FINDER V2 might interfere with the connection. Try moving the FINDER V2 and your mobile device to an area with fewer Wi-Fi signals.
Why won't my InfiRay FINDER FH35R V2 connect to my computer?
If the InfiRay FINDER V2 Measuring Instruments won't connect to a computer or external power supply, it could be due to several reasons: * The external power supply may be completely discharged. Check the external power supply and charge it if necessary. * The computer may be turned off. * The data cable may be damaged.
How to remove condensation from InfiRay FINDER FH35R V2 Measuring Instruments lens?
If there's condensation on the lens of your InfiRay FINDER V2 Measuring Instruments, wipe the external optical surface with the included microfiber lens cloth. If the condensation is on the interior, allow the FINDER V2 to dry by leaving it in a warm, dry environment for at least 4 hours.
What to do if InfiRay FINDER FH35R V2 Measuring Instruments won't focus?
If the InfiRay FINDER V2 Measuring Instruments will not focus, it might be because the image settings are not optimal for the current environmental conditions or the object being observed. Adjust the image and device settings to try and improve the focus.
Why is there no image on my InfiRay Measuring Instruments?
If the image of the object is missing on your InfiRay Measuring Instruments, ensure that you are not looking through glass. Remove any glass windows from the field of view.
General| Resolution | 384x288 |
|---|---|
| Pixel Size | 12 μm |
| NETD | <40 mK |
| Frame Rate | 50 Hz |
| Lens | 35 mm |
| Detection Range | 1818 m |
| Ingress Protection | IP67 |
| Internal Memory | 16 GB |
| Detector Type | Uncooled Vox |
| Battery Type | Li-ion |
| Battery Life | 6 hours |
| Diopter Adjustment | -5D to +5D |
| Operating Temperature | -20°C to +50°C |
| Storage Temperature | -30°C to 60°C |
| Dimensions | 160x70x60 mm |
Details the operation of each button and available shortcut combinations.
Covers powering the device on/off and using control buttons for operations.
Guides on entering standby mode and adjusting diopter/objective focus.
Explains automatic, manual, shuttered, and shutterless NUC correction methods.
Covers the procedures for capturing still images and recording video footage.
To Next Page