Accessing the Infoblox SoT 1405 Series Appliance
30 Infoblox Installation Guide
Determine how you want to deploy the appliance, and use the following worksheets to note the network
settings that you want to enter on the wizard screens. If you are configuring an HA pair, you must configure
each node individually.
* For Grid member
** For an independent appliance
Use the following worksheet when configuring an independent HA pair:
On the last screen of the wizard, click Finish. The Grid Manager application restarts. If you configured an HA pair,
use the VIP address when you make an HTTPS connection to the HA pair.
Settings Enter your information here
Grid Name
Shared Secret Host Name
Grid Master’s IP Address
LAN1 Port IP Address and Netmask
Gateway IP Address
*Port Settings
**Admin Password
**Local Date, Time, and Time Zone
or
NTP Server IP Address
Settings Enter your information here
System Name
Shared Secret
Host Name
Virtual Router ID
VIP (Virtual IP) Address and Netmask
Node 1: HA Port IP Address
Node 2: HA Port IP Address
Node 1: LAN1 IP Address
Node 2: LAN1 IP Address
Gateway IP Address
Admin Password
Local Date, Time and Time Zone
or
NTP Server IP Address