Trinzic Reporting 1405 Product Overview
For the Infoblox 1400 Series Platforms 9
• Management through the Infoblox Grid.
• LOM (Lights Out Management) support.
• Replaceable hard disk drives.
• Hot-swappable AC power supplies.
• Additional AC power supply for a redundant 1+1 configuration.
• Optional DC power supplies.
• Alternative system configurations for the support of copper or fiber SFP 1GbE or SFP+ 10GbE interfaces.
Note: The Network Insight ND-1405 does not support HA operation and acts only as a Grid member.
Trinzic Reporting 1405 Product Overview
The Trinzic Reporting 1405 is a high performance network appliance that collects data from Infoblox Grid members,
stores the data in the reporting database, and generates reports that provide statistical information about IPAM,
DNS, DHCP, and system activities and performance. You configure and manage the Trinzic Reporting 1400 and view
reports through the Grid Manager. For more information about Reporting features and licensing, refer to the
Infoblox NIOS Administrator Guide.
Key features of the Trinzic Reporting 1405 appliance include the following:
• Three (3) active 1GbE Ethernet interfaces: two (2) active interfaces to support event reporting features across
the network, and one interface (MGMT) designated for device management. (The HA port is inactive and
reserved for future use.)
• Management through the Infoblox Grid.
• LOM (Lights Out Management) support.
• Replaceable hard disk drives.
• RAID 1 redundant hard disk array (see Trinzic Reporting TR-1400 Rear Panel on page 16 for details).
• Hot-swappable AC or DC power supplies in a redundant 1+1 configuration.
• Alternative system configurations for the support of copper or fiber SFP 1GbE or SFP+ 10GbE interfaces.
Note: The Trinzic Reporting 1405 does not support HA operation and acts only as a Grid member.
To Next Page
Loading...
Need help?
General
